NM550 ASTM/AISI Alloy Hot Rolled Wear Resistant Steel Plate & Sheet

Wear-resistant Steel Plate 550 Processing and Welding Techniques：

NM550 significantly surpasses NM500 in hardness and stress sensitivity; after cutting, all cut edges and corners must be thoroughly ground to relieve stress and remove the surface hardened layer, thereby preventing cracking, edge chipping, or spalling during subsequent assembly and heavy-load operations.

• Gentle bending with wide angles
• Low-speed press forming
• Large-radius rolling
  Avoid welding unless necessary
• Prioritize bolted assembly

In which challenging scenarios can the NM550 Wear Resistant Steel Plate be used?

• High-end sand and gravel aggregate equipment
• Severe coal washing equipment
• Metallurgical port heavy equipment

What are the advantages of NM550 compared to NM450?

70mm, 50mm, 40mm, 60mm Wear Resistant Steel Plate Nm500. Under the same extreme working conditions, the wear resistance lifespan is increased by 20% – 30% compared to Nm500, and by more than 50% compared to Nm450. It is the exclusive material for high-end working conditions with extremely high load, 24-hour continuous operation, and strict requirements for the lifespan of components.

What makes the NM550 chemical element formula special?

Anti-Wear Abrasion Resistant Steel Plate 550: This steel plate is formulated with a high-hardness micro-alloying strengthening recipe. It precisely optimizes the ratios of carbon, chromium, molybdenum, and boron elements, strictly controls harmful impurities such as sulfur and phosphorus, and refines the martensite wear-resistant matrix structure. This significantly enhances the hardness e wear resistance stability of the base material, avoiding problems such as coarse grain size, brittleness, and insufficient quenching property in ultra-high hardness steel.

• (Cr): 1.00% – 1.60% – Improves the surface hardness, wear resistance, and corrosion resistance of the steel.
• (P), (S): Minimizes the cold brittleness and hot brittleness of the steel.

What are the standards for the NM550 steel plate?

GB/T 24186

What are some maintenance tips for the NM550?

Hot Rolled Nm550 Wear Resistant Plate, 7mm, 16mm, 18mm, 20mm Thick Steel Plate. During use, regularly check for wear conditions and replace damaged parts in time. If there is slight wear on the surface, it can be repaired by grinding and continue to be used; in case of severe wear, it must be replaced immediately to avoid affecting the overall performance of the equipment.

NM550 Purchase and Usage Tips：

1. Choose a reputable manufacturer：JBLstainless

2. Reasonable calculation of thickness: Select the appropriate thickness based on the specific working conditions. Generally, for mining equipment, a thickness of 8-12mm is recommended; for cement plants, a thickness of 15mm or more can be chosen.

3. Welding process requirements: Professional.

In response to the demands of special-shaped devices, what processing services can JBL offer?

• Cutting processing
• Composite plate
• processing Rolling and flattening of sheet metal

What is the processing performance of NM550?

• Cutting processing performance
• Heat processing performance
• Welding performance