AR600 abrasion resistant steel plate is suitable for demanding industrial environments where exceptional surface hardness and abrasion resistance. Designed for applications involving severe sliding abrasion, material handling, mining and heavy-duty equipment, AR600 steel plate reduces wear-related maintenance and extends component service life when properly selected and applied.
AR600 is a high-hardness, abrasion-resistant steel plate designed for industrial applications exposed to severe abrasive wear. With a nominal hardness classification around 600 HBW, AR600 is intended for components that require a high level of resistance to surface wear. It is commonly considered for applications involving abrasive materials, sliding contact and repeated material impact, subject to the specific operating conditions and the material recommendations.
Compared with lower-hardness wear-resistant steel grades, AR600 may provide improved resistance to certain forms of abrasive wear. However, higher hardness can also affect toughness, forming and fabrication requirements.
AR600 steel plate is available in different dimensions and thicknesses. Customized or standard sizes, subject to availability
Hardness | Approximately 600 HBW |
|---|---|
Material Type | Quenched and tempered abrasion-resistant steel |
Thickness | 8 - 800 mm |
ความกว้าง | 1500 - 4200 mm |
ความยาว | 6000 - 18000 mm |
Delivery condition | Hot rolled, controlled rolled, or normalized |
Process Service | Cutting, drilling and other fabrication options |
AR600 is designed for severe abrasive wear conditions. Its high-hardness surface can help reduce material loss in components exposed to continuous contact with abrasive materials.
In suitable operating conditions, AR600 steel may help extend the service life of wear parts and reduce replacement frequency, contributing to lower maintenance requirements.
AR600 plate can be considered for selected applications in mining, quarrying, material handling and heavy industrial equipment where abrasion resistance is a major requirement.
AR600 steel plate is suitable for selected components exposed to severe abrasive wear. Actual suitability depends on impact loading, operating temperature, structural design and fabrication requirements.
| C (%) | Si (%) | Mn (%) | P (%) | S (%) | Cr (%) | Ni (%) | Mo (%) | B (%) |
| 0.47% | 0.70% | 1.00% | 0.015% | 0.010% | 1.20% | 2.50% | 0.70% | 0.005% |
| YIELD | TENSILE UTS 20°C (68°F) | ELONGATION | CHARPY -40°C | HARDNESS BHN |
| 1,625 MPa (235 Ksi) | 1,940 MPa (280 Ksi) | 4% | 15ft/lbs (20J) | 590 -> 610 BHN |
Different wear-resistant steel grades serve different operating requirements.AR600 abrasion resistant steel plate is not automatically the best choice for every application. Where impact loads are high or fabrication requirements are complex, AR400 or AR500 may provide a better overall solution.
| Comparison | AR400 | AR500 | AR600 |
| Hardness | 400 HBW | 500 HBW | 600 HBW |
| Abrasion Resistance | High | Higher | Very high |
| Toughness | Application dependent | Application dependent | Requires particular attention |
| Fabrication | Manufacturer guidance required | Manufacturer guidance required | More demanding |
| Typical Application | General abrasion | More severe abrasion | Selected severe abrasion conditions |
การควบคุมผลิตภัณฑ์อย่างสมบูรณ์ช่วยให้เราสามารถรับประกันได้ว่าลูกค้าของเราจะได้รับสินค้าที่มีคุณภาพดีที่สุด ราคาที่ดีที่สุด และบริการที่ดีที่สุด ติดต่อเราเพื่อขอใบเสนอราคาฟรี JBLSTEEL จะมอบโซลูชั่นที่เหมาะสมสำหรับโครงการของคุณ.
