S700MC high strength low alloy structural steel Plates Sheets
S: Structural steel
700: Yield strength
MC: Thermo-mechanically rolled (controlled rolling and controlled cooling)
S700MC high strength low alloy structural steel Plates Sheets is a high-strength, low-alloy structural steel produced via the thermo-mechanical control process (TMCP)—involving controlled rolling and controlled cooling—in accordance with the EN 10149-2 standard; it is specifically designed for cold-formed, heavy-duty structural components.
S700MC Chemical Composition：
C: ≤0.12
Mn: ≤2.10
S: ≤0.015
Si: ≤0.50
P: ≤0.025
Alt: ≥0.015
Nb+V+Ti: ≤0.22
S700MC Mechanical Properties:
Yield Strength: Rp0.2 ≥ 700 MPa
Tensile Strength: Rm 750–850 MPa
Elongation (A50): ≥11% (t ≥ 3 mm)
≥10% (t < 3 mm)
180° Cold Bend Test: d = 2a, no cracking
Impact Energy (Longitudinal): -20°C ≥ 30 J
S700MC Dimensions and Specifications:
Thickness: 6mm–100mm
Width: 1500mm, 2000mm, 2200mm (CNC cutting based on drawings; deep processing including irregular shaping, bending, welding, and drilling)
Length: 6000mm, 8000mm, 10000mm; custom-length cutting and retail available
S700MC Executive Standard:
DIN EN 10149-2 (Code: 1.8974)
S700MC Origin:
Germany, Baosteel, Wugang, etc.
S700MC delivery condition:
Hot-rolled.
S700MC Application Areas:
Key characteristics of high-strength automotive steel S700MC:
The S700MC stock currently supplied by JBL includes three common thicknesses:
Dikte (mm) | Toepassingen |
|---|
2.0 | Vehicle body panels, inner door panels |
3.0 | Chassis structural components, reinforcement beams |
4.0 | Heavy-duty vehicle frames, load-bearing components |
Key materials for lightweight automotive design:
Body structural components: A-pillars, B-pillars, crash beams, etc.
Chassis components: Suspension assemblies, subframes
Commercial vehicle chassis rails: Enhancing load-bearing capacity
Engineering considerations for material selection:
When selecting S700MC, several key parameters must be considered:
· Forming Limit Diagram (FLD): To evaluate material performance during complex forming operations.
· Springback characteristics: High-strength steel exhibits 20–30% more springback than conventional steel.
· Die wear: Requires die materials with higher hardness.
· Welding process: Laser welding or resistance spot welding is recommended.
Kosten Item | Ordinary Staal | S700MC |
|---|---|---|
Materiaal Kosten | Benchmark | +15% |
Weight Savings | 0% | -18% |
Processing Kosten | Benchmark | -5% |
Service Life | 5 Years | 8 Years |
Industry Application Case Study:
After a domestic commercial vehicle manufacturer switched to S700MC instead of traditional materials:
· Chassis weight was reduced by 23%
· Production costs decreased by 8%
· Product competitiveness was significantly enhanced
Volledige controle over de producten stelt ons in staat om ervoor te zorgen dat onze klanten de beste kwaliteitsprijzen en service ontvangen. Neem contact met ons op voor een vrijblijvende offerte, JBLSTEEL biedt de juiste oplossing voor uw project.
